init

.env

@@ -0,0 +1,10 @@
+MQTT_PORT=1883
+INFLUX_PORT=8088
+GRAFANA_PORT=3002
+ZIGBEE_MQTT_PORT=1884
+HOST_IP=192.168.178.160
+
+DATA_DIR=/opt/monitoring/
+
+TIMESCALE_PASSWORD=ijeec9Uy
+

config/monitoring.conf

@@ -0,0 +1,190 @@
+# Configuration for telegraf agent
+[agent]
+  ## Default data collection interval for all inputs
+  interval = "10s"
+  ## Rounds collection interval to 'interval'
+  ## ie, if interval="10s" then always collect on :00, :10, :20, etc.
+  round_interval = true
+
+  ## Telegraf will send metrics to outputs in batches of at most
+  ## metric_batch_size metrics.
+  ## This controls the size of writes that Telegraf sends to output plugins.
+  metric_batch_size = 1000
+
+  ## Maximum number of unwritten metrics per output.  Increasing this value
+  ## allows for longer periods of output downtime without dropping metrics at the
+  ## cost of higher maximum memory usage.
+  metric_buffer_limit = 10000
+
+  ## Collection jitter is used to jitter the collection by a random amount.
+  ## Each plugin will sleep for a random time within jitter before collecting.
+  ## This can be used to avoid many plugins querying things like sysfs at the
+  ## same time, which can have a measurable effect on the system.
+  collection_jitter = "0s"
+
+  ## Default flushing interval for all outputs. Maximum flush_interval will be
+  ## flush_interval + flush_jitter
+  flush_interval = "10s"
+  ## Jitter the flush interval by a random amount. This is primarily to avoid
+  ## large write spikes for users running a large number of telegraf instances.
+  ## ie, a jitter of 5s and interval 10s means flushes will happen every 10-15s
+  flush_jitter = "0s"
+
+  ## By default or when set to "0s", precision will be set to the same
+  ## timestamp order as the collection interval, with the maximum being 1s.
+  ##   ie, when interval = "10s", precision will be "1s"
+  ##       when interval = "250ms", precision will be "1ms"
+  ## Precision will NOT be used for service inputs. It is up to each individual
+  ## service input to set the timestamp at the appropriate precision.
+  ## Valid time units are "ns", "us" (or "µs"), "ms", "s".
+  precision = ""
+
+  ## Log at debug level.
+  # debug = false
+  ## Log only error level messages.
+  # quiet = false
+
+  ## Log target controls the destination for logs and can be one of "file",
+  ## "stderr" or, on Windows, "eventlog".  When set to "file", the output file
+  ## is determined by the "logfile" setting.
+  # logtarget = "file"
+
+  ## Name of the file to be logged to when using the "file" logtarget.  If set to
+  ## the empty string then logs are written to stderr.
+  # logfile = ""
+
+  ## The logfile will be rotated after the time interval specified.  When set
+  ## to 0 no time based rotation is performed.  Logs are rotated only when
+  ## written to, if there is no log activity rotation may be delayed.
+  # logfile_rotation_interval = "0d"
+
+  ## The logfile will be rotated when it becomes larger than the specified
+  ## size.  When set to 0 no size based rotation is performed.
+  # logfile_rotation_max_size = "0MB"
+
+  ## Maximum number of rotated archives to keep, any older logs are deleted.
+  ## If set to -1, no archives are removed.
+  # logfile_rotation_max_archives = 5
+
+  ## Pick a timezone to use when logging or type 'local' for local time.
+  ## Example: America/Chicago
+  # log_with_timezone = ""
+
+  ## Override default hostname, if empty use os.Hostname()
+  hostname = ""
+  ## If set to true, do no set the "host" tag in the telegraf agent.
+  omit_hostname = false
+[[outputs.influxdb_v2]]
+  ## The URLs of the InfluxDB cluster nodes.
+  ##
+  ## Multiple URLs can be specified for a single cluster, only ONE of the
+  ## urls will be written to each interval.
+  ##   ex: urls = ["https://us-west-2-1.aws.cloud2.influxdata.com"]
+  urls = ["http://influxdb:8086"]
+
+  ## Token for authentication.
+  token = "8n40XpIPBzacUIL9n5gfACuiMURhRRPs5An_-dpAjm7CkDhsEu7ZbEwYLhJXK0d0S040awx9ka0LhksNhH3K_w=="
+#  token = "V7eZ4QpALEMBLykdrmcLG2s8fGQeODQ6_YeU9zxABgCuDssZDF9nj04cJdChqYRE1Z6d8H-hfdQ9lrX_31Y5yA=="
+
+  ## Organization is the name of the organization you wish to write to; must exist.
+  organization = "odroid"
+
+  ## Destination bucket to write into.
+  bucket = "system"
+
+  ## The value of this tag will be used to determine the bucket.  If this
+  ## tag is not set the 'bucket' option is used as the default.
+  # bucket_tag = ""
+
+  ## If true, the bucket tag will not be added to the metric.
+  # exclude_bucket_tag = false
+
+  ## Timeout for HTTP messages.
+  # timeout = "5s"
+
+  ## Additional HTTP headers
+  # http_headers = {"X-Special-Header" = "Special-Value"}
+
+  ## HTTP Proxy override, if unset values the standard proxy environment
+  ## variables are consulted to determine which proxy, if any, should be used.
+  # http_proxy = "http://corporate.proxy:3128"
+
+  ## HTTP User-Agent
+  # user_agent = "telegraf"
+
+  ## Content-Encoding for write request body, can be set to "gzip" to
+  ## compress body or "identity" to apply no encoding.
+  # content_encoding = "gzip"
+
+  ## Enable or disable uint support for writing uints influxdb 2.0.
+  # influx_uint_support = false
+
+  ## Optional TLS Config for use on HTTP connections.
+  # tls_ca = "/etc/telegraf/ca.pem"
+  # tls_cert = "/etc/telegraf/cert.pem"
+  # tls_key = "/etc/telegraf/key.pem"
+  ## Use TLS but skip chain & host verification
+  # insecure_skip_verify = false
+[[inputs.cpu]]
+  ## Whether to report per-cpu stats or not
+  percpu = true
+  ## Whether to report total system cpu stats or not
+  totalcpu = true
+  ## If true, collect raw CPU time metrics
+  collect_cpu_time = false
+  ## If true, compute and report the sum of all non-idle CPU states
+  report_active = false
+[[inputs.disk]]
+  ## By default stats will be gathered for all mount points.
+  ## Set mount_points will restrict the stats to only the specified mount points.
+  # mount_points = ["/"]
+  ## Ignore mount points by filesystem type.
+  ignore_fs = ["tmpfs", "devtmpfs", "devfs", "iso9660", "overlay", "aufs", "squashfs"]
+[[inputs.diskio]]
+  ## By default, telegraf will gather stats for all devices including
+  ## disk partitions.
+  ## Setting devices will restrict the stats to the specified devices.
+  # devices = ["sda", "sdb", "vd*"]
+  ## Uncomment the following line if you need disk serial numbers.
+  # skip_serial_number = false
+  #
+  ## On systems which support it, device metadata can be added in the form of
+  ## tags.
+  ## Currently only Linux is supported via udev properties. You can view
+  ## available properties for a device by running:
+  ## 'udevadm info -q property -n /dev/sda'
+  ## Note: Most, but not all, udev properties can be accessed this way. Properties
+  ## that are currently inaccessible include DEVTYPE, DEVNAME, and DEVPATH.
+  # device_tags = ["ID_FS_TYPE", "ID_FS_USAGE"]
+  #
+  ## Using the same metadata source as device_tags, you can also customize the
+  ## name of the device via templates.
+  ## The 'name_templates' parameter is a list of templates to try and apply to
+  ## the device. The template may contain variables in the form of '$PROPERTY' or
+  ## '${PROPERTY}'. The first template which does not contain any variables not
+  ## present for the device is used as the device name tag.
+  ## The typical use case is for LVM volumes, to get the VG/LV name instead of
+  ## the near-meaningless DM-0 name.
+  # name_templates = ["$ID_FS_LABEL","$DM_VG_NAME/$DM_LV_NAME"]
+[[inputs.mem]]
+  # no configuration
+[[inputs.net]]
+  ## By default, telegraf gathers stats from any up interface (excluding loopback)
+  ## Setting interfaces will tell it to gather these explicit interfaces,
+  ## regardless of status.
+  ##
+  # interfaces = ["eth0"]
+  ##
+  ## On linux systems telegraf also collects protocol stats.
+  ## Setting ignore_protocol_stats to true will skip reporting of protocol metrics.
+  ##
+  # ignore_protocol_stats = false
+  ##
+[[inputs.processes]]
+  # no configuration
+[[inputs.swap]]
+  # no configuration
+[[inputs.system]]
+  ## Uncomment to remove deprecated metrics.
+  # fielddrop = ["uptime_format"]
+

config/mosquitto/mosquitto.conf

@@ -0,0 +1,7 @@
+password_file /mosquitto/config/users
+port 8883
+
+persistence true
+persistence_location /mosquitto/data
+log_dest file /mosquitto/log/mosquitto.log
+

config/mosquitto/users

@@ -0,0 +1,2 @@
+zigbee:$7$101$IBQ2q1IxkCamOv8W$pxtAYGwyboq1kDZfiLPgJnoViwNHQ2MriDMeASrx2IxsXh0erfROm7Vm68CAcKuQtJ2aogY1H4Y/ubzwqHerfg==
+telegraf:$7$101$wum+lK0/6s2xMtyF$QXx4+s0avZ9e4AqONFFb6r2hrWPpHK8G+N1LOTgkTzloyXbTXujw9h05O4Ww10qI3UYVChNsttd72wp87Gu11A==

config/prometheus/prometheus.yml

@@ -0,0 +1,20 @@
+# my global config
+global:
+  scrape_interval: 10s
+  evaluation_interval: 10s
+
+# Alertmanager configuration
+alerting:
+  alertmanagers:
+    - static_configs:
+        - targets:
+          # - alertmanager:9093
+
+scrape_configs:
+  - job_name: "prometheus"
+    static_configs:
+      - targets: ["localhost:9090"]
+  - job_name: 'temperature'
+    static_configs:
+      - targets:
+        - 192.168.222.136:2112

config/telegraf/telegraf.d/solar-shelly.conf

@@ -0,0 +1,44 @@
+[[inputs.http]]
+#URL for NYC's Citi Bike station data in JSON format
+urls = ["http://192.168.178.139/status"]
+
+#Overwrite measurement name from default `http` to `citibikenyc`
+name_override = "solar_shelly"
+
+#Exclude url and host items from tags
+tagexclude = ["url", "host"]
+
+#Data from HTTP in JSON format
+data_format = "json"
+
+#Parse `stationBeanList` array only
+json_query = "meters"
+
+#Set station metadata as tags
+#tag_keys = ["id", "stationName", "city", "postalCode"]
+
+#Do not include station landmark data as fields
+#fielddrop = ["landMark"]
+
+#JSON values to set as string fields
+#json_string_fields = ["statusValue", "stAddress1", "stAddress2", "location", "landMark"]
+
+#Latest station information reported at `lastCommunicationTime`
+#json_time_key = "timestamp"
+
+#Time is reported in Golang "reference time" format
+#json_time_format = "unix"
+
+#json_timezone = "UTC"
+
+[[outputs.postgresql]]
+# https://github.com/influxdata/telegraf/blob/release-1.24/plugins/outputs/postgresql/README.md
+  connection = "postgres://postgres:ijeec9Uy@timescaledb"
+
+  tags_as_foreign_keys = true
+  create_templates = [
+    '''CREATE TABLE {{ .table }} ({{ .columns }})''',
+    '''SELECT create_hypertable({{ .table|quoteLiteral }}, 'time', chunk_time_interval => INTERVAL '1h')''',
+    '''ALTER TABLE {{ .table }} SET (timescaledb.compress, timescaledb.compress_segmentby = 'tag_id')''',
+  ]
+

docker-compose.yml

@@ -0,0 +1,94 @@
+version: '3'
+
+services:
+  grafana:
+    image: "grafana/grafana:latest"
+    restart: unless-stopped
+    user: "1000"
+    depends_on:
+      #      - influxdb
+      - timescaledb
+    ports:
+      - "${GRAFANA_PORT}:3000"
+    volumes:
+      - "${DATA_DIR}/grafana/data:/var/lib/grafana"
+      - "${DATA_DIR}/grafana/log:/var/log/grafana"
+    environment:
+      - GF_SECURITY_ADMIN_PASSWORD=secret
+      - GF_SERVER_ROOT_URL=http://${HOST_IP}:${GRAFANA_PORT}/
+        #      - GF_RENDERING_SERVER_URL=http://renderer:8081/render
+        #      - GF_RENDERING_CALLBACK_URL=http://grafana:3000/
+      - GF_LOG_FILTERS=rendering:debug
+      - GF_INSTALL_PLUGINS=ryantxu-ajax-panel,grafana-piechart-panel,marcusolsson-hourly-heatmap-panel
+
+        #  renderer:
+        #    image: grafana/grafana-image-renderer:latest
+
+        #  prometheus:
+        #    image: prom/prometheus:latest
+        #    restart: unless-stopped
+        #    volumes:
+        #      - ./config/prometheus/prometheus.yml:/prometheus/prometheus.yml
+        #      - ${DATA_DIR}/prometheus/data:/prometheus/data
+        #    extra_hosts:
+        #      - "host.docker.internal:host-gateway"
+        #    command:
+        #      - '--storage.tsdb.retention.time=100d'
+        #
+        #  influxdb:
+        #    image: influxdb:latest
+        #    restart: unless-stopped
+        #    ports:
+        #      - "${INFLUX_PORT}:8086"
+        #    volumes:
+        #      - ${DATA_DIR}/influxdb:/var/lib/influxdb2
+
+  timescaledb:
+    image: timescale/timescaledb:latest-pg14
+    restart: unless-stopped
+    environment:
+      POSTGRES_PASSWORD: ${TIMESCALE_PASSWORD}
+    volumes:
+      - ${DATA_DIR}/timescale:/var/lib/postgresql/data
+
+        #  mqtt:
+        #    image: eclipse-mosquitto:latest
+        #    user: "1000"
+        #    ports:
+        #      - "${MQTT_PORT}:8883"
+        #    volumes:
+        #      - ./config/mosquitto/mosquitto.conf:/mosquitto/config/mosquitto.conf
+        #      - ./config/mosquitto/users:/mosquitto/config/users
+        #      - ${DATA_DIR}/mosquitto/data:/mosquitto/data
+        #      - ${DATA_DIR}/mosquitto/log:/mosquitto/log
+        #    restart: unless-stopped
+
+    # The dongle does not actually work with odroid
+    #  zigbee2mqtt:
+    #    restart: unless-stopped
+    #    image: koenkk/zigbee2mqtt
+    #    volumes:
+    #      - ${DATA_DIR}/zigbee2mqtt-data:/app/data
+    #      - /run/udev:/run/udev:ro
+    #    ports:
+    #      - ${ZIGBEE_MQTT_PORT}:8080
+    #    environment:
+    #      - TZ=Europe/Berlin
+    #    devices:
+    #      - /dev/ttyUSB0:/dev/ttyUSB0
+
+  telegraf:
+    image: telegraf
+    restart: unless-stopped
+    depends_on:
+      #      - influxdb
+      - timescaledb
+    volumes:
+      - ./config/telegraf/:/etc/telegraf/
+    command:
+      - telegraf
+      - --config
+      - /etc/telegraf/telegraf.conf
+      - --config-directory
+      - /etc/telegraf/telegraf.d/
+